The Detoolz DZ-SE128, 18 V, 1450 RPM, 10 mm chuck, 2-cell cordless drill/driver (drill/driver) with 18 V, 1450 RPM, 10 mm chuck is a model suitable for small and medium-sized jobs in the household or in workshops.

It is designed for operation at ambient temperatures between + 5°C and 40°C and for installation at altitudes no more than 1000 m above sea level is recommended. Humidity should be less than 50% at 40°C.
It can be stored or transported at ambient temperatures between -25°C and 55°C.

The Detoolz DZ-SE128, 18 V, 1450 RPM 2-cell cordless drill and screwdriver has a simple and compact design with a housing with very good mechanical properties, all components are manufactured according to the metric system, so it is easy to use, easy to adjust and repair.

The maximum drilling diameter can be indicative: - an alloy steel or certain types of wood can be difficult to drill when particularly hard. On the other hand, it may not be difficult to screw diameters exceeding the 8mm max. figure given below.

The figures indicated as sound emission levels are not necessarily safe working levels. Although there is a correlation between emission levels and exposure, it cannot be reliably used to determine whether or not further precautions are necessary.

Factors influencing the effective noise emission level include the characteristics of the work room, other noise sources, etc.

The permissible level of exposure may also vary from country to country. However, this information will enable the user of the equipment to better assess the danger and risk to which he/she is exposed if he/she does not use headphones.