The Little Farmer GF-0358 horizontal-shaft diesel engine is a robust, efficient and reliable product that can be used for a wide range of household and domestic applications such as:
- Lawn and garden machinery;
- Power tillers / Motor mowers;
- Construction/Industrial / Construction Machinery;
- Power generators;
- Agricultural equipment;
- Irrigation motor pumps.
This engine is designed and guaranteed to operate at ambient temperatures between -5°C and 40°C at a maximum altitude of 1000m above sea level. Humidity must be less than 50% at 40°C. It can be stored or transported at ambient temperatures between -15°C and 55°C. If the inlet air temperature of the engine exceeds 40°C or the altitude is above 1000m, the air density becomes lower and will cause a loss of engine power.
The DIESEL 178F, 7CP engine has the following characteristics:
- It is an air-cooled, CI (direct injection) compression ignition, four-stroke diesel engine with a single cylinder driving a horizontal shaft. It has a decompression lever and recoil starter for easy starting;
- Can be fitted with a number of optional equipment such as electric start system, clutch, etc;
- The engine is compact and lightweight with low fuel consumption and does not require costly maintenance;
- Angled shaft supported with ball bearing for greater stability;
- Large, double-walled tank with in-tank fuel filter. Large, easy-to-fill, car-style cap;
- Automatic idle or throttle control for longer engine life, improved fuel economy and reduced noise.
- Reduced noise level thanks to a large capacity multi-chamber exhaust system;
- Engine delivers higher torque at lower revs;
- Engine design provides excellent thermal balance, which contributes to reduced cylinder wear, lower oil consumption and longer engine life.
- Features ergonomic construction with all controls placed for convenient access;
- Robust construction, made from the highest quality, lightweight and durable materials for extended service life
The product comes equipped with fulcrum.
Engine DIESEL 178F 7CP
La achiziționarea acestui produs primești 2607 puncte.
- + 14-day returns
- + Pay in installments
- + Delivery within 48h
- + Warranty & service
- + 100% secure payments
- + Loyalty points
We also recommend..
-
-
Battery 18V/2AHIn stock at supplier-25%RON 95.32 RON 127.10 Offer valid while stocks last, until 30 Jun 2026
-
-
-
Welding mask Almaz, Automatic, viewing area 90x35mm, 2 welding arc sensors, for weldingIn stock at supplier5/5RON 73.21
-
-
-
Almaz welding machine, MMA, maximum current 250A, digital display, energy-saverIn stock at supplierRON 385.37
-
-
-
-
Welding mask Almaz, Automatic, viewing area 90x35mm, 2 welding arc sensors, for welding/polishingIn stock at supplierRON 99.00
-
Welding mask Almaz, Automatic, viewing area 93x43mm, 2 welding arc sensors, for welding/polishingIn stock at supplierRON 125.01
-
-
Almaz welding machine, MMA, maximum current 250A, analogue display
- ↗ Easy to use
- ↗ Easy transport
- ↗ Low energy consumption
In stock at supplierRON 324.36 -
-
Almaz welding support, magnetic, hexagonal, maximum lifting capacity 11.3 KgIn stock at supplierRON 15.00
-
Almaz welding machine, MMA+MIG+MAG+MAG+LiftTIG+FCAW, maximum current 200A, digital displayIn stock at supplier-30%RON 580.09 RON 828.69 Offer valid while stocks last, until 30 Jun 2026
-
-
Other customers also bought…
-
-
Battery 18V/2AHIn stock at supplier-25%RON 95.32 RON 127.10 Offer valid while stocks last, until 30 Jun 2026
-
-
-
Welding mask Almaz, Automatic, viewing area 90x35mm, 2 welding arc sensors, for weldingIn stock at supplier5/5RON 73.21
-
-
-
Almaz welding machine, MMA, maximum current 250A, digital display, energy-saverIn stock at supplierRON 385.37
-
-
-
-
Welding mask Almaz, Automatic, viewing area 93x43mm, 2 welding arc sensors, for welding/polishingIn stock at supplierRON 125.01
-
Almaz welding machine, MMA, maximum current 250A, analogue display
- ↗ Easy to use
- ↗ Easy transport
- ↗ Low energy consumption
In stock at supplierRON 324.36 -
Welding mask Almaz, Automatic, viewing area 90x35mm, 2 welding arc sensors, for welding/polishingIn stock at supplierRON 99.00
-
-
Almaz welding support, magnetic, hexagonal, maximum lifting capacity 11.3 KgIn stock at supplierRON 15.00
-
-
-
-
28Nm 18V Li-ion drill and screwdriverIn stock at supplier-35%RON 82.61 RON 127.10 Offer valid while stocks last, until 30 Jun 2026
Frequently bought together
-
-
-
-
-
-
Extendable wall cleaner with vacuum and bagIn stock at supplier-30%RON 451.90 RON 645.57 Offer valid while stocks last, until 30 Jun 2026
-
Extendable wall sander with vacuum cleaner Ø215 750WIn stock at supplier-20%RON 545.01 RON 681.27 Offer valid while stocks last, until 30 Jun 2026
-
-
Suction wall sander 750W, 180mmIn stock at supplier-20%RON 278.03 RON 347.54 Offer valid while stocks last, until 30 Jun 2026
-
-
-
-
-
Wall sander Almaz 750W, Ø180mm, with variable speed control and LED beltIn stock at supplierRON 393.50
-
Detoolz 3-disc abrasive set, 380 mm diameter, P40 grit, with Velcro, for concrete grindersIn stock at supplierNEWRON 25.89
-
Wet concrete grinding machine Detoolz, power 750W, disc diameter 390mmIn stock at supplierRON 609.07
-
850W wall sander, Ø180mm, with variable speed control and LED stripIn stock at supplier-30%RON 305.34 RON 436.21 Offer valid while stocks last, until 30 Jun 2026
-
Detoolz finishing pad, 375 mm diameter, plastic, with Velcro, for concrete grindersIn stock at supplierNEWRON 44.00
