Submersible pump 0.79kW 30/65m 1800l/h 1" without float, Micul Fermier GF-1709-S001-G02 is used for supplying clean water to households, small irrigation systems or various consumers. The water can be pumped from wells or wells with a maximum delivery head of up to 65 metres and a flow rate of up to 1.8 m³/hour.

The stainless steel submersible water pump consists of 3 main components: electric motor, screw pump and sealing elements.

The electric motor is a three-phase asynchronous electric motor which is located at the bottom of the pump. The electric motor is airtight and when placed in the water it acts as a radiator which lowers the temperature at the bottom of the pump.

The pump screw is mounted at the top and when the motor is running at any speed, the screw, which has been connected to the motor shaft being driven at the same time as the stator, will make an eccentric revolving movement about the stator shaft on the diameter of the seal.

Compared to a normal submersible pump, the pumps in this series are screw pumps and have the following advantages:
- all parts that come into contact with the fluid are anti-corrosive;
- possibility of vertical or horizontal mounting;
- no lower limit on the lowering distance in the water, which gives a satisfactory efficiency without having to depend on the height of the water rise. Electricity consumption of the pump is directly proportional to the lift height.
• capacitate mare de ridicare si eficienta ridicata; fara a avea o inaltime nominala de ridicare, Pompa submersibila 0.79kW 30/65m 1800l/h 1" fara plutitor, Micul Fermier GF-1709-S001-G02 este mai eficienta cu peste 50% fata de o pompa submersibila obisnuita si astfel scade si consumul de energie.

The advantage of the stainless steel submersible water pump is that it can be used not only for long-distance water transport for irrigation or sprinkling, but also for industrial use in high buildings.

If you attach a pressure regulator to the pump, it can be used as an automatic irrigation tool.