The Micul Fermier GF-1325-S001-G02 submersible water pump GF-1325-S001-G02, with a flow rate of 2200l/h, is an equipment used to transport water from wells, lakes, basins, fountains in order to supply various consumers.
The pump has three main components: motor, pumping unit and casing.

The main characteristic of a submersible vibration pump is the maximum delivery head, as they only work when immersed in the fluid to be pumped.

If you want to buy a submersible pump, you should consider in particular the pumping head (how many metres you want the pump to "lift") and the required water flow rate.

The water depth should not be less than 0.5m. You must always be careful at what depth you set the pump to operate and never leave the pump running outside the water surface.

The pump must operate fully submerged in the water and without touching the walls and bottom of the well or wellbore. The uninterrupted running time of the pump must not exceed 2 hours, with subsequent switch-off for 20 min.
The pump must be securely attached to and suspended from a structure of sufficient strength to support it when in the water.

The pump must not be used to transfer dirty water containing suspended solids, sand or to transfer water containing acids or corrosive substances, sea water, flammable, dangerous liquids.

The GF-1325-S001-G02 GF-1325-S001-G02 submersible water pump is characterised by multiple qualities such as small diameter, low mass, sturdy casing, high flow rate and corrosion resistant

The benefits of using the Micul Fermier GF-1325-S001-G02 submersible vibration pump:
- low energy consumption;
- low mass and easy to use;
- copper coil.