The Detoolz DZ-C289 450W ceramic tile cutter can be used for cutting concrete, stone, marble and granite tiles, tiles and floor tiles in small and medium thickness.
For a finer, dust-free cut the ceramic tile cutting machine, 450W, Detoolz DZ-C289 is equipped with water pump, which pumps water from the water bath to the cutting place.
The Detoolz DZ-C289 450W ceramic tile cutting table machine, Detoolz DZ-C289 has the possibility to adjust the cutting angle from 0 to 45° for precise cutting, depending on your needs.
The Detoolz DZ-C289 electric tile cutter with diamond disc, 450W, can perform ceramic tile cutting operations: tile/tile fissure cuts, perpendicular cuts, cuts at any angle (e.g. diagonal cuts) and 45 degree mitre cuts.
The Detoolz DZ-C289 tile cutter, 450W, Detoolz DZ-C289 is equipped with a 180 mm diameter disc (continuous diamond crown) and a 22.2 mm diameter reamer. This disc with a continuous diamond crown is intended for cutting terracotta or other tiles (also for cutting ceramic tiles with a soft structure).
For cutting harder materials such as tiles of higher abrasion classes or other materials up to abrasion class 8-10, the use of Turbo type diamond discs is recommended. The use of diamond discs of a type other than continuous crown is absolutely forbidden

Features of the Detoolz DZ-C289 450W ceramic tile cutting machine:
- Water-cooled for dust-free cutting and high durability of the diamond disc;
- Parallel guide for precise work;
- Worktable adjustable between 0 - 45° for precise angled cutting;
- Diamond cutting blade;
- Disc guard.

WARNING!
The machine can only be used with diamond discs without grooves.
It is forbidden to fit discs intended for cutting materials other than ceramic (metal, wood, plasterboard, plastics, etc.). It is also forbidden to cut other materials that cannot be assimilated to ceramics, stone, etc.
Dry cutting is prohibited.
The weight of the parts to be machined must be chosen so as not to cause the machine to become unbalanced.