Electrodes 3.2x350mm MONOLITH Life
Momentan indisponibil Anunță-mă când revine
Beneficii
Descriere
Electrodes 3.2x350mm MONOLITH Life, Almaz AZ-0044
MONOLITH electrodes are used for manual AC or DC manual arc welding in general construction or heavy duty metal profiles made of carbon or medium alloy steel. Electrodes with a diameter of 2 ... 4 mm can be used for welding in any position except vertically downwards, electrodes with a diameter of 5 mm can be used for welding in straight horizontal, horizontally downwards, transversely and vertically upwards positions.
Conditions of use: deposition rate 8.0-9.0 g/A.ch. Electrode consumption is 1.7 kg per kilogram of weld metal.
Chemical composition of weld metal (%):
Mn: 0,40 - 0,65
C: Max. 0,11
Si: Max.0,15 - 0,45
P: Max.0,035
S: Max.0,030
Mechanical characteristics of weld metal:
-Tear strength N/mm²: 510-610
-Elongation at break %: ≥22,0
-Strength J/cm²: ≥78
Specific characteristics:
This type of electrodes can weld in difficult access conditions. Thus, the gas bubbles that are released around the electric arc remove water and provide favourable conditions for welding, which makes them suitable for welding for example eroded sections of water pipes at pressures up to 1 Atm.
The MONOLITH electrodes ensure easy ignition, provide a stable and uniform arc with little spatter, easy slag separation, uniform weld formation. They are specially designed for welding of steel and metal structures subjected to static and dynamic loads, for welding of containers, pipelines, where high mechanical properties of the welded sections are required.
Wet electrodes can be reconditioned by drying for one hour at a temperature of 300-350°С.
Welding conditions:
Amperage of electric current (A), depending on the diameter of electrodes (mm)
2,5 > 50-100
3,0 > 60-120
Packaging:
Diameter, mm: 2,50
Rod length mm: 350
Number of electrodes per package: 123-127
Package weight, kg: 2,5
Diameter, mm: 3,00
Rod length mm: 350
Number of electrodes per pack: 83-88
Pack weight, kg: 2,5
The electrodes do not need to be calcined before welding, in case of normal storage, but if they get wet, before welding they should be dried for 60 minutes at the temperature of 110 +/-5°С.
Product safety information
Almaz — echipamente de sudura pentru profesionisti si pasionati de bricolaj
Almaz este brandul dedicat sudurii din portofoliul Micul Fermier, cu o gama completa de aparate de sudura si accesorii pentru orice tip de lucrare: de la reparatii ocazionale in atelierul propriu, pana la proiecte industriale sau agricole care cer echipamente robuste si fiabile.
Gama Almaz acopera principalele tehnologii de sudura — MMA (electrod), MIG/MAG si TIG — alaturi de accesorii esentiale precum electrozi, sarma de sudura, masti de protectie, manusi si alte echipamente de siguranta. Aparatele sunt construite pentru a oferi un arc stabil, pornire usoara si consum eficient de energie, fiind potrivite atat pentru utilizatori la inceput de drum, cat si pentru cei cu experienta in sudura metalelor.
Ca parte a ofertei Micul Fermier, Almaz vine cu acelasi standard de incredere: produse testate, raport bun calitate-pret si suport pentru clientii din mediul rural si urban deopotriva, care au nevoie de unelte solide pentru intretinerea utilajelor, reparatii metalice sau constructii mici.
Write a review and earn loyalty points worth RON 1.00.
